{
  "_": [
    "NOTES-FROM-PLANNING.md entry 153 section 5. Three holes from the sample scan, with what GroupLab measured",
    "for each, so the crops beside the article are drawn from a recorded measurement rather than re-derived on",
    "every site build. Produced by: grouplab analyze samples/gl-cf25-ltr-d-25-shots-600-dpi.png --calibre .264",
    "--json <out>, then make_crops.py --record.",
    "",
    "The scan is the only real material this project may publish, under the consent record in samples/PROVENANCE.md."
  ],
  "scan": "samples/gl-cf25-ltr-d-25-shots-600-dpi.png",
  "dpi": 600,
  "nominalBulletInches": 0.264,
  "cartridge": "6.5 Creedmoor",
  "holes": [
    {
      "name": "hole-smallest",
      "shot": 22,
      "x": 586.07,
      "y": 4760.93,
      "measuredInches": 0.2368,
      "fractionOfBullet": 0.897
    },
    {
      "name": "hole-typical",
      "shot": 21,
      "x": 1634.17,
      "y": 4729.33,
      "measuredInches": 0.2506,
      "fractionOfBullet": 0.949
    },
    {
      "name": "hole-largest",
      "shot": 18,
      "x": 1726.73,
      "y": 3994.33,
      "measuredInches": 0.2743,
      "fractionOfBullet": 1.039
    }
  ],
  "photograph": {
    "name": "hole-shadow",
    "source": "hole-shadow-source.png",
    "from": "One of the developer's photographs of the 6.5 Creedmoor 15 shot sheet, 2026-09-20, square on and close. Published under the developer's standing consent of 2026-09-24 in samples/PROVENANCE.md; pixels only, turned as GroupLab displays it.",
    "shot": 1,
    "pixelsPerInch": 293.0,
    "measuredInches": 0.3833,
    "fractionOfBullet": 1.452,
    "sheetMedianInches": 0.3833
  }
}
